nx_udp_socket_create(....)" takes more than 40 seconds until the process is...
I try to build up the UDP communication between DK-S7G2 and PC. This works fine now on my application, but I don´t understand why the "status = nx_udp_socket_create(&ip_0, &udp_socket, (CHAR *...
View ArticleString Scroll multi language
Hi.I am using the string scroll widget with GUIX Studio and I have three languages configured. The string scroll only shows me the texts in the main language. How can I display the texts according to...
View ArticleClik here to view.
Bug seen with SDMMC fx_media open (DMAC close, SSP_ERR_NOT_OPEN)?
Hello,I am working with an SD card. The whole solution works, and the media opens correctly (and I can read and write). However now that I'm listening for SSP errors, I am getting...
View ArticleHow to do a command line build with e2 and IAR?
When using the IAR tool chain, it does not create a makefile like gcc does. The option is grayed out.I tried following the e2 help for command line build for Jenkins. When I did this, I got many "no...
View ArticleUSBX Mass Storage Class Host, up dated workspace
Since yesterday I'm testing USB pen drives connected to J3 connector of DK-S7G2.I found two suitable application notes...
View ArticleMPU Stack Error when running TraceX (previously worked)
Hello, I'm getting a MPU Stack Error stack error when trying to run TraceX (SSP 1.3.3), as caught in NMI_Handler() in bsp_group_irq.c. I have had TraceX previously working. Since then I have a few more...
View ArticleHow do you locate all GUIX Studio resources in external QSPI memory?
Hi -What is the best way to build a project so all of the GUIX studio resources are placed in QSPI memory? - Using BSP_PLACE_IN_SECTION(".qspi_flash_data") I can get individual items to link to the...
View ArticleClik here to view.
An issue with the inability to import Pixelmap IDs for pixmaps into e2 studi
Hi,everoneRecently, I tried to create my own project by learning the "washing machine" routine. During the creation process, I imported a pixmap ("WHEEL_DOT_ORANGE") from the "washing machine" routine...
View ArticleMD pin configuration ambiguity for UART bootloader!
Hello Guys, I want to have the UART Non blocking bootloader as well as Ethernet Bootloader on my custom board of S5D9 controller, so i have read the manual there are two operating mode and it will be...
View ArticleClik here to view.
A problem with creating a "specifications.o" file failed
Hi,everonyRecently, I tried to create my own project by learning the "washing machine" routine. During the creation process, I imported a pixmap from the "washing machine" routine into my own project...
View Articlewriting data on web browser
HiAm working on ethernet webserver.Am able to load a html page from sd card.I have a box in my html where i wish to write data from board , but am unable to do it.It seems like a static page.am unable...
View ArticleReal time video with S7G2
Is S7G2 capable of playing real time video, say at 24/25 fps, RGB565 color and a resolution like 800x600 or similar? With the info available I think it is only capable of slow rate animations, but I...
View ArticleExample of using Secure MPU memory protection
Are there any examples of using the secure MPU features of the Synergy parts? Is there an api in synergy somewhere? I recall that IAR may have put in some hooks into their compiler - is there...
View ArticleClik here to view.
Console over USB takes a long time to show up in SSP 1.4.0
hello, I am using a TB-S5D5 board with Windows 10, E2studio 6.2.0 and SSP 1.4.0.I would like to communicate with my computer via an USB console I used the console framework, and I modify two...
View ArticlePin can't be written logic value
Hi all,I have the IOPORT_04_PIN_15 set as an output and so far it was working fine, but nowI cannot set pin to HIGH (3V), apparently this pin is not working anymore.I'm wondering if it's possible to...
View ArticleS7G2 - Programming flash successful, but device do not start with application
Hi there, We're using the S7G2 SOM designed and manufactured by TeamFDI. We created an app, which works well when using the debugger on e2 studio. However, when we try and program the flash using...
View ArticleGUIX in DK S7G2
Can I store Memory section for GUIX Canvas Buffer & Memory section for JPEG Work Buffer in SD CARD ,If it Will be Possible Then How??
View ArticleHow to implement window switching on the LCD screen
Hi,everyoneI created some small objects in GUIX and I hope to implement window switching by operating on small objects. In e2 studio, after running the code, I didn't have any errors or warnings, but...
View ArticleClik here to view.
Debugger stops "can't find source file", even with "step over"
Hello Forum,I' using SSP 1.3.3 and S7 MCU, I had a small but working hhtp server application, web content started from usb mass storage.But since a few days I always get the following debugger message...
View ArticleTranslator xliff format
Hi.Once I have exported a file in xliff format from GUIX Studio, what steps should I take to translate the texts into the selected language and get the new file with the translated texts and be able to...
View Article