Synergy and FileX - How can a large eMMC be partitioned multiple small...
PE-HMI1SDRAM = MT48LC16M16A2B4 256Mb (16M x 16) eMMC = MTFC2GMVEA 2GByte gcc 4.9.3It appears that the fx_media_format() API would have to be used, but it looks like the API is only used to setup 1...
View ArticleSPI timing and transfer rate.
Hello Everyone,I am using SPI to sample output of an ADC which can be read at up to 20 Mbps. I am trying to achieve the highest possible transfer rate but I am not able to do so. SPI module is...
View Articlemaximal URL-length in HTTP-server is way to small and not really comfortable...
The maximal length of a called URL for the HTTP-Server (NX_HTTP_MAX_RESOURCE) is with 40 characters way to short for a server.Unfortunately it is not able to change this length with the SSC and must be...
View ArticleCompile fails with nxd_bsd.h issues
I'm using IAR 8.1 and having some incompatibilities with nxd_bsd.h. Any ideas on how I can resolve this? IAR ANSI C/C++ Compiler V8.21.1.14461/W32 for ARM Copyright 1999-2017 IAR Systems AB....
View ArticleHow to add pressure sensors to sk_s7g2
Hi everyone I want to add pressure sensors to my sk_s7g2. But I don't know how to add it. My sensor is HX711. It seems that I need to write my own driver. I want to read the data through this sensor....
View ArticleFlashloader Add-on with SSP 1.4.0
Dear All, Is there any available flashloader addon for SSP 1.4.0 ? If any then please guide me for the same..
View ArticleIs it possible to have 3.5 inch LCD with 320x480 pixels without SDRAM .
Dear all, I am using the Renesas Synergy R7FS5D97E3A01CFB! I want to interface the LCD of 3.5 inch with 320x480 pixels. Can it be feasible with the inner RAM that is bss or i have to strictly shift to...
View ArticleBLE string
Hi, allI'm using an example provided on renesas Website for BLE RL78.When I use the app GATTbrowser i can check all the services availables and characteritics that i can change using the app.It's...
View ArticleEthernet - Run time switching between static and DHCP IP allocation
Hi all,I need to use Ethernet with run time switching between Static and DHCP allocation. How I can achieve this?This is on S7G2.
View ArticleThere was a problem importing an interface created in GUIX into e2 studio
Hi,everyone.I recently made an interface to an LCD screen in GUIX and prepared to import it into e2 studio to perform some operations. But when I imported and configured the thread, I clicked "build"...
View ArticleUSBHS Host mode
Hi,I am using the USBHS in "host" mode on the S7G2 boardHow does over currrent detection work via pin "P707" ?Is it an automatic mode that cut the power off?must a handler be declared on the over...
View ArticleWant to implement Modbus over ethernet in SK S7G2
Dear All, i am new to the synergy, I want to implement Modbus over Ethernet in SK S7G2, Can you please guide me how to start with this , and what short of setting should i use for the NETX framwork?
View ArticleAE-CAP1 and Low Power Modes Mixed together
Hi, I'm trying to evaluate how low power I can get with your capacitive touch system and the low power mode manager. I downloaded the module guide and while it's very informative it's difficult to...
View ArticleHow to use ID Code Protection with e2studio
Hello I try to the id code protection of S5D9 with e2studio as this posthttps://renesasrulz.com/synergy/f/synergy---forum/8996/id-code-protection I set ID Code by configurator and I added below code...
View ArticleProblem with UART after debugging
HiI have an application that uses two UART's and other stuff like ethernet etc. On the first UART (SCI0), there is a console running (sf_console). On the second UART (SCI6), there is a device connected...
View ArticleConfigure the PHY Micrel IC KSZ8081RNA(in board PHY) SFRs by SK S7G2
Dear all, I have a query that how to access the Registers or access the registers or SFRs of the PHY by the S7G2 SK board.. There are many Registers to access KSZ8081RNA(in board SFRs), but i cant find...
View ArticleDisplay and Touch inversion with S7G2 GUIX
In these days we have succesfully managed our HMI interface (based on TFT 8 "display with 800x600 pixels and resistive 8" touch screen) with the DK-S7G2 kit and our adapter card.We started from the...
View ArticleSkkynet etk version for SSP 1.4.0?
Hey all , How can I install the skkynet etk tool addon for ssp 1.4.0 so that I can integrate on my SSP and work on that easily ?
View ArticleBehavior of Low Voltage Detection (LVD) in S7G2
I have implemented a test of the CPU voltage using the LVD and instructions found in Renesas app note R01AN3492EU0101.I initially configured my test to generate an NMI if the CPU voltage fell below...
View ArticleE2 Studio lost Renesas HW Debug configuration (E2 V5 SSP 1.3.4)
in E2 Studio, I somehow lost my hardware debug configuration to my PK-S5D9 board. When I started to debug, E2 asked me to pick a Jlink debugger, then pick s processor type. After I did that it just...
View Article