GUI X Documentation
Hello.Where can I find documentation and examples of implementation of the different elements that can be inserted into a project in Thread X with GUIX Studio. Such as all the options of Window,...
View ArticleHow to replace the text information of a button on GUIX?
Hello, by learning the "Hello World" routine, I have learned how to replace the text information on this button with another text message by clicking on a button. As a result, I have a question: How...
View ArticleHow to reset i2c bus
Hello! As far as I know there is a common problem in i2c - if master initiates slave reading and then because of some reason (MCU reset for example) leaves transaction unfinished - bus becoming stuck...
View ArticleClik here to view.
Custom BSP creation
Hello! In my project I need to use QSPI. As I understand, in order to use SSP QSPI framework you need to have QSPI code in your BSP. I was able to modify BSP code from one of S7G2 board application...
View ArticleSSP 1.4.0 ethernet error.
I have update e2studio from 5.0.23 to 6.0.2 and ssp 1.3.0 to SSP 1.4.0. now IP instance is not working, everything was working with SSP old version, when i check IP1_status = nx_ip_status_check ();...
View ArticleSynchronous UART. SCK.
Hello all! I'm new in the forum and new with Renesas MCUs.I'm working with an S124 and peripheral SCI9 in SYNCHRONOUS UART mode: - P109 --> MOSI - P110 --> MISO - P111 --> SCKIt is working...
View ArticleHow to control sfr region
Hi I would like to redefine sfr region.Can I do it? If I can , I would like to know how to redefine sfr region. Thanks.
View ArticleEtherent web server refresh and http post
HiAm working on S7G2-DK board.I need to develop a web server html page through my code.1.I want to refresh my page automatically every 2 seconds.I tried the below code from default netx web server...
View Articletoggle LED
i am working in dk-s7g2 board and it was possible to toggle LED6 to LED12 in Dk s7g2 board? if yes, then how it was possible.
View ArticleClik here to view.
YROTATE-IT-S5D9 Not Working Anymore
Hello,I am using a YROTATE-IT-S5D9 board with E2studio 6.2.0 and SSP 1.3.0 but I can't seem to be able to run programs on it anymore: I keep getting the following error.Now even some basic code that...
View ArticleClik here to view.
WiFi shows connection but cannot ping
hello everyone, I have a problem.I want to use gt202wifi module to be a hotspot that can continuously send information.Now, I can connect it with other devices, but I can't ping IP. The following is...
View ArticleCompiler warnings with 1.4.0
I've updated e2 studio 5.4.0.023 with SSP 1.3.0 to e2 studio 6.2.0 with ssp 1.4.0 and when I cleaned the project and re-built it instead of the 0 error and 0 warnings I'm now getting 0 errors and 136...
View ArticleClik here to view.
HAL CAN Driver on PCLKB and clock source = HOCO (48MHz)
Hello,I have a problem with the HAL CAN Driver of SSP v1.33.I selected Clock Source HOCO = 48 MHz, PCKLB=24MHz.The problem is the api g_can0.p_api->open(g_can0.p_ctrl, g_can0.p_cfg); always returns...
View ArticleClik here to view.
There is a problem with my hotspot
hi everyone, My hotspot can be connected via a mobile phone, but it cannot be connected via a computer. I want to know why. I want to implement the microcontroller as a server and send the information...
View ArticleWebserver from sd card
HiI am working on webserver for s7g2-dk board.Is it possible to load a html file from SD card . i mean required html file can be placed in SD card and will be used for web server.Is there any example...
View ArticleQuestions about connecting external sensors
Hi,everyone:On the development board of SK-S7G2, I want to achieve some functions by connecting gravity sensors and infrared sensors. But I'm not sure which part of the board should be connected to the...
View ArticleWhy does the PE-HMI1 S7G2.ld file specify a 64M QSPI ?
/* Linker script to configure memory regions. */MEMORY{ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x0400000 /* 4M */ RAM (rwx) : ORIGIN = 0x1FFE0000, LENGTH = 0x00A0000 /* 640K */ DATA_FLASH (rx) :...
View ArticleE2 Studio 1.4.0 Debug load fails, second load works
I installed E2 Studio 1.4.0.After loading any program, it will fail in the ThreadX scheduler (see below). The second attempt to load the program will run as expected.What is going on?Thanks,Bruce...
View ArticleSynergy - how can I setup the heap to use SDRAM?
PE-HMI1SDRAM = MT48LC16M16A2B4 256Mb (16M x 16) eMMC = MTFC2GMVEA 2GByte I am using the FileX fx_media_check() API that needs 500000 Bytes. This much temporary memory can't be allocated from RAM, so...
View ArticleProblem with RS485 communication on dk-s124
I work on RS485 communication between dk-s124 by adding SN65176B and raspberrypi with RS485 shield...
View Article