RIIC master not detecting busy
I running with SSP 1.5.1 which has busy detection in the list of update, but the riic driver doesn't seem to be detecting, or reporting, busy.I'm connecting two S5D9s to an i2c bus with multiple device...
View ArticleWhere to find the latest supported version of GCC
I am using a Synergy S7 chip using e2 Studio. I have been looking for what the most recent version of GNU Tools for ARM that is supported. Last time I looked I believe it was 6.2 2016q4. Now I cannot...
View ArticleBoot failing in SSP 1.5.1 at...
Hello,I have recently tried to upgrade my project to SSP 1.5.1 from 1.5.0.We have been running 1.5.0 for over a month with no issues.We are using IAR.I installed the SSP 1.5.1 over my existing 1.5.0...
View ArticleSynergy Boot swap function
Hi,we are evaluating the Boot Swap functionality of the S5D5 processor. As per the datasheet by changing the BTFLG flag value in the AWS register the default boot address can be swapped within 0x0000...
View ArticleHow To convert what is on TFT display to .BMP
I'm working on a project where I'm trying to save the image of what is on a 480x800 TFT display. The idea is that we will capture what is on the screen instead of using a camera to take a picture of...
View ArticleEthernet, cellular framework, and wifi all in one system
Hey -I have an application that currently uses ethernet. I am adding cellular communications to it, and will eventually add wifi. Right now I have a single IP instance (ip_0) and all the netx...
View ArticleWhat are the causes of the error GX_DRAW_NESTING_EXCEEDED?
This error code is being returned when gx_canvas_drawing_initiate() is called. How can I know what the nesting level is? How can I avoid exceeding it?
View ArticleCap Touch Button Module Guide
I am continually running into an error when trying to run the CTSU peripheral with the following application project. I downloaded the file listed:...
View ArticleHow to send CAN wake-up pattern to the bus?
Hello,I have two devices both with a S124 Controller and a TJA1043 CAN transceiver by NXP. I want to wake up the other one by sending a wake up pattern to the bus. The data sheet of the TJA1043 tells...
View ArticleIDLE or HOOK threadx
Hi,I want to monitor cpu usage, is there a way like idle or hook, to implement a led blinking in idle mode.I hope i am clearThanks for your help
View ArticleClik here to view.
Cell Framework
I have an IP instance working on top of the cell framework, like this: What is the preferred way to get information such as IMEI, Operator, Network Type, bytes send and recceived, etc? Also, the BG96...
View ArticleClik here to view.
Reading out the TRS bit (I2C)
Hello! I'm trying to read out the TRS bit from the ICCR2 register to determine if the slave is in a transmit or a receive mode. My function looks like this:__STATIC_INLINE bool HW_SMB_CheckTxRxMode...
View ArticleGUIX Issue - Can't change border colors at runtime using gx_widget_border_draw()
It seems in GUIX when a widget is defined they inherit the default border colors (ie: BTN_BORDER, DEFAULT_BORDER and WINDOW_BORDER). In my application I would like to change the color of borders at...
View ArticleNetX http, ping general tcp issues when connecting to device via VPN
Hello Forum,We have been working on a product using a S7G2 part on ssp1.4.0 being built with the IAR tools. We have discovered a weirdness we cant explain when we connect to the device through a VPN....
View ArticleIs there a migration path or supporting documentation for moving from an...
Hi,We are currently using SSP 1.3.0. It looks like we may need to use the new touch panel v2 framework.I have searched, but can't seem to find any documentation about migrating from one SPP to a newer...
View ArticleHow to modify linker script per tech note "Create separate sections for RAM...
My S7 linker configuration currently specifies a single RAM region from address 0x1FFE.0000 through address 0x2007.FFFF. My initial thought was to break this into two sub-regions: the first ending...
View ArticleSSD1963 Display Controller Board to do Screen Orientation Rotation on S7G2
Hi,I need to interface our S7G2 MCU with a display controller board (NHD-5.0-800480TF-20) to do orientation rotation from landscape to portrait. The LCD being used is NHD-5.0-800480TF-AXTL-#CTP that is...
View ArticleTrigger custom widget draw functions explicitly after receiving touch events...
Hi,I am trying to trigger the custom draw function on specific parts of the screen based on touch events received on other widgets. gx_system_canvas_refresh and gx_system_dirty_mark show weird behavior...
View ArticleMap Renesas pool memory in external SDRAM
Hi,For S7G2, I want to map the pool memory of USB and NET stacks in external SDRAM.By default, in common_data.c file, the pool memory is put in internal RAM (uint8_t g_packet_pool0_pool_memory and...
View ArticleNetx Error codes
Im getting the error code 0x4D from nx_secure_tls_session_create() and since this is from the encrypted source files of NetX I cant figure out what this error code means. Is there a way to trace the...
View Article