Adding TraceX to Project causes "fatal error: 'tx_thread.h' file not found"
Hallo,In the past I've tried TraceX with SSP 1.0.0 and it worked. Now I've been adding TraceX to my SSP 1.1.0 alpha project.Unfortunately compiling throws the following error:...
View ArticleAdding RTC Driver, r_rtc_cfg.h not found?
I'm trying to add the RTC Driver, but when I build I get an error indicating that the file 'r_rtc_cfg.h' is not found. Â I see other components adding a _cfg.h in the directory...
View ArticleConflict to use the 2 Ethernet Interfaces plus the SD Card Interface in our...
In our DK-S7G2 based Project we need to make use of the 2 Ethernet Interfaces and of the SD Card Interface,however we've found that there is a conflict due to several Processor lines are shared between...
View ArticleRE: Adding TraceX to Project causes "fatal error: 'tx_thread.h' file not found"
Hello Ralph, there's a known problem with 1.1.0-alpha where tx_port.h is included at the wrong point and causes a number of exceptions. I suggest you update to full SSP 1.1.0 release and the problem...
View ArticleRE: Adding RTC Driver, r_rtc_cfg.h not found?
How did you add the RTC driver? Did you add it in the Threads tab or the Components tab?
View ArticleRE: r_sci_spi.c bug
Hi Jim,That is right, p_context instance was not set in the spi error handling routine, this will be fixed in the next verison of SSP. Thank you for pointing this out.Regards,Kamal
View ArticleRE: Save on SD Card resources generated with GuiX
Hi Jeff,thank you very much for your kind help. I'll study your example and try to adapt to my needs.Thanks again and have a nice dayEnzo
View ArticleRE: Release Date, SSP 1.1.0?
I can't seem to access the site:synergygallery.renesas.com/sspCan anyone else? Is this a known issue?
View ArticleRE: Release Date, SSP 1.1.0?
Yeah it looks like its down. Â It was working earlier this morning, but not now. Â Maybe crashed. Â or to many people downloading the new E^2 studio and ssp at the same time. Â Its like 900megs. Â Matt
View ArticleRE: Release Date, SSP 1.1.0?
Network outage has the site offline for now. I will post here when it is back online.
View ArticleRE: Adding TraceX to Project causes "fatal error: 'tx_thread.h' file not found"
Hello Karol,thanks for your reply, I'll test it with SSP 1.1.0.RegardsRalph
View ArticleRE: DK-S7G2 Bluetooth LE module reset
I'm pretty sure what that bytes mean ;-) :Your SPI-Interface ins't set up right, all bits are shifted to the left by 1 (exept the last), so your clock phase is most probably wrong.
View ArticleRE: DK-S7G2 Bluetooth LE module reset
Hi Josh,Thank you for your help!I have changed the Clock Phase setting of my SPI on SCI driver to Data sampling on even edge, data variation on odd edge and it worked! I now receive the correct...
View ArticleClik here to view.
DK-S7G2 Bluetooth LE module reset
Hi everyone,I'm attempting to make use of the CMM-9301 Bluetooth LE module thats on the S7G2 development kit, but I'm having some issues with it.After powers on or its reset pin has been pulled high...
View ArticleRE: DK-S7G2 Bluetooth LE module reset
Take a look at the datasheet again, in the one I found there is a jumper J1 on the module that would prevent a "reset" with the pin. It is not a real reset input, it does a complete Off/On cycle for...
View ArticleTCP socket Connect() request fail with NX_IP_ADDRESS_ERROR(0x21)
Hi,I have a client running with the ip address : 192.168.3.127 and it is trying to connect 85.119.83.194.Following are the scenarios which i tried,1)Cross connection to PC with static ip...
View ArticleRE: How to uses data flash sk-s7g2 GCC
I have following arrays unsigned char loops[6][250][32];unsigned char zones[250][32];in my program. I want to keep them in data flash. How to do?Thanks in advance,Erkut ERGIL
View Article