Regarding i2c with sk-s7g2
Hi, Iam working with i2c on sk-s7g2.In my application Renesas sk-s7g2 board configured as master.and Psoc5 Configured as slave with 04 is & bit Slave address.I am developing the code for write/read...
View ArticleClik here to view.
Renesas as I2C master
Hello,I'm trying to configure Renesas s7g2-sk as I2C master and Cypress PSoC as my slave. I'm able to test the slave (with address 0x04) using Bridge control panel and able to read and write properly.I...
View ArticleI can no longer debug after upgrading e2studio
As I explained in another thread, I just upgraded my e2studio from the 5.3.1.002 version to the 5.4.0.023 and I also added the new SSP 1.3.0. All the old projects compile well and, in fact, the...
View Articlegx_multi_line_text_view_text_set unable to display raw strings using latin...
I am using a gx_multi_line_text_view object and I am trying to display characters that are generated from a different processor. The active language is set properly and the other strings, using the...
View ArticleS7G2 SSP 121 - USBX Host Mass Storage + HID devices init
Hi !I am working on a custom board using a S7G2 (the same on the SK board) SSP121, it has a LCD screen and a USB HID touchscreen.The project run with a USB host HID device always plugged on startup on...
View ArticleAdd your own folder under the SRC folder
Hello I have some question about Add your own folder under the SRC folder，I added the drive folder under the src folder，In the driver folder have two file IIC_Software.h and IIC_Software.c ，I am...
View ArticleLow Power Mode on DK-S124
I have been try to get out of "sleep" mode on the S124. I have a AGT timer going off every 500 milliseconds. Shouldn't this timer be enough to wake the MCU from sleep mode?
View ArticleServing a dynamically generated file for download without using FileX
For testing our prototype which uses a webserver without FileX (just request_notify callback) I would like to serve a csv file with measurement data for download. The file is rather large, up to 30 MB,...
View ArticleUART Configuration
Good morning, after investigating in the forums and documentation of the new SSP v1.3.0, we have a problem when configuring a UART at runtime. We want to change the parity parameters, data bit and stop...
View ArticleNVIG_SystemReset on PK-S5D9 works only while debugging.
I use NVIC_SystemReset() as a user initiated reset when a button is pressed on the PK-S5D9.When debugging with JTAG, it works. When the debugging session is closed, all I see is that the LCD freezes,...
View Articleinternal flash write endurance rating
Could you tell me the internal flash write endurance rating of S1 ,S3 and S5?
View ArticleSynergy Platform for Commercial use
Could you please provide the Export Control Numbers (ECN) for:the Synergy S5 processors groupthe Synergy S7 processors groupthe SSP package.RegardsDavid
View ArticleClik here to view.
Using Flashloader API within custom Bootloader application
The bootloader that I'm working on for SSP 1.2.0 uses the Renesas Flashloader API, and had been working reliably until recently with a specific image.After the bootloader writes the image, it fails the...
View ArticleQuestion about Capacitive Touch Sensing Unit
I installed and tuned the example program Capacitive_Touch_Slider_FW_MG_AP in my SK-S7G2 board and noted that the original values (prior to tuning with CTW) resulted in poor slider detection but after...
View Articleaccelerometer
Anyone know how to connect the Arduino's Astrometer module in the renances synergy and if it has any library or code to use. The design is a sine angle analyzer, cosine, and give the slope ...thank you...
View ArticleI need to add ThreadX to my project and I should refer to those Demo?
I need to add ThreadX to my project and I should refer to those Demo ？
View ArticleClik here to view.
Use the GPT_OPS (Output Phase Switching) for easy control of brushless DC motor
Hello,I want to make the control of a brushless DC motor and I found on the S7G2 User's Manual (pages 619 and 620) a possibility with the Output Phase Switching (GPT_OPS). My goal is to realize the...
View ArticleMessage Frameworks on sf message
How to restore the Message Frameworks on sf message on the new stack?After I remove the message frameworks thread stack, Try to add it back again but this framework is nowhere to be found. Thanks.
View ArticleIssue with multiple DHCP Clients on SSP 1.2.0
Hello, On an S7G2-DK platform with SSP 1.2.0, I try to integrate the GT202 add-on. So, as per NetX configuration, I have 2 DHCP Clients, one for Ethernet IP Instance, and another for Wifi IP...
View ArticleClik here to view.
NetX BSD error
Hi,I am working on a project using nx_BSD support, but i am getting following error while building the project.'TX_THREAD' has no member named 'bsd_errno' in nxd_bsd.c...
View Article