Hello Synergy community,
I am trying to use the program "A very basic USB Bootloader that uses MMF" on S7SK board.
I am able to custom and run the led blinking SSP110 HAL app and the Time & Temp HMI SSP110 app provided in the package.
I am able to run my own led blinking HAL SSP121 app (directly generate a .bin not a .srec with srec_cat)
but
I can't get my HMI (SSP121 or SSP110, based on S7SK bsp) app running and at this point I have no idea why.
The screen is switched ON but stay black.
- The AddSectionAttribute.py file runs well. bootloader_flash_qspi.bat (srec_cat.exe) runs well too.
- I have changed in the linker script FLASH ORIGINE from 0x00000000 to 0x02000000
- I have removed DTC from the SPI driver as Karol suggested in March in an other thread.
- Finally I have tried to copy the linker script from the provided HMI app to my HMI app, (I had to add some sections in the SSP121 version), it compiles but it doesn't work = black screen.
Any idea ?
Regards,