RE: Viewing ThreadX source when using IAR
Hi Matt,The example that you gave: nx_dns_host_by_name_get is not part of NetX and has it's own source module that you must select in the components view.your licence will allow you to View in...
View ArticleRE: Viewing ThreadX source when using IAR
Hi Gary,So this is the problem I have been having. I go and do like you say there select nx_dns_src, unselect nx_dns, clean and then rebuild all. The source is failing to compile. Anytime I try...
View ArticleRE: Graphical Overlay on Video Image
I've done this on the PE-HMI using ARGB 32 BPP using the GLCD to alpha blend in layer 2.Basically, you have to define the frame buffer for layer2 (layer 1 is the default layer that GUIX uses) and then...
View ArticleRE: Getting same MAC Address on different boards
Hi Jeremy,Thanks for the reply!!Can you please share the discussion link for the below,"(Karol has posted on the forum a work around to enable the MAC address to be loaded from a location in flash, and...
View ArticleClik here to view.
RE: Custom bsp problem s7g2_sk
Hi steveo64 thanks , i tried this it won't work after creating bsp . when i want to use it in e2 studio it always just give me BSP base board support package for chosen synergy family. No rtos...
View ArticleClik here to view.
Custom bsp problem s7g2_sk
Hi, I tried to make custom bsp using Renesas SynergyTM Creating a Custom Board Support Package tried to make same wolfpack bsp but it shows only BSP not showing me wolfpack bsp template as shown in...
View ArticleRE: Power down USB HUB
Hi NaN,You can try this pdf. link here-> www.renesas.com/.../r01an0492ej0200_usb.pdfIt is all about usb in renesas, hope it will help something.God Bless.Best,Mark BauloRenesasrulz Forum Moderator
View ArticleRE: Viewing ThreadX source when using IAR
Hello Matt,When building NetX/USBX sub-modules (i.e. DNS) from source, you also need to compile their parent (NetX in this case) from source. On top of that, building NetX from source requires ThreadX...
View ArticleRE: Graphical Overlay on Video Image
Hello Jim,In most of our projects, GUIX with sf_el_gx are rendering to the background layer (layer 1). Enabling layer two in alpha-enabled format (or with smaller dimensions than layer 1) and drawing...
View ArticleGraphical Overlay on Video Image
Using the DK-S7G2, I am able to send graphical data to the display generated by GUIX, and with provided firmware/configuration, I am able to use the camera to play video. Now I want to combine the...
View ArticleRE: Getting same MAC Address on different boards
Hello Nandan,Here's the project I posted in another thread: (Please visit the site to view this file)You can also try Steve's workaround: renesasrulz.com/.../6928.aspxRegards
View ArticleRE: Power down USB HUB
Hello Nandan,You can control power on the VBUS by manually controlling USBH_VBUSEN pin (P11_0). The VBUS power switch on the SK-S7 is low-enable so you should write high if you wish to disable it.It is...
View ArticleRE: USB protocol without ThreadX
Hello everyone,I also want to create a USB CDC application on S3A7 controller without USBX/threadX.Is there any application note available? Please share if anyone has worked on it.
View ArticleRE: USB protocol without ThreadX
Hello,Currently there aren't any application notes available for implementing USB without use of RTOS. The existing USB driver layer (sf_el_ux) is integrated at the framework level and cannot be used...
View ArticleUSB protocol without ThreadX
Is it possibile to create an USB protocol using the SYNERGY S1 microcontroller without setting the TheadX RTOS? I'm Using a Synergy S1 microcontroller (DK-S124) and E2Studio 5.1.0.022 with Synergy...
View ArticleRE: Power down USB HUB
Hi karol,>>In the configuration.xml,P11_0 is configured in peripheral mode.1)I tried to disable the USB port by writing high to P11_0 like...
View ArticlePower down USB HUB
Hi,I am using S7G2 - SK board.I want to power up/down the USB host hub(USB_H) from my code.How can i do that?Any document will be helpful.Regards
View ArticleRE: NetX BSD does not compile in SSP 1.1
I have taken the project from this thread, and migrated it to SSP 1.1.3 as well. Using a V3 S7-DK board, with the same DIP switch settings as you use, I get an IP address from a DHCP server and I can...
View ArticleNETX, Ethernet Performance expectations
What are the realistic expectations for throughput over Ethernet using the NETX stacks? This would be doing raw packet transfers as well as when using abstractions/protocols, such as FTP. We're...
View Article