RE: SD card using S7 DK/SK
Hi , set card type to embedded instead of card. The card detect line is bypassed in this mode.Dig.
View ArticleRE: SD card using S7 DK/SK
Dig:I modified and not working. Still getting 0x11 (17,FX_MEDIA_NOT_OPEN) for the status. Not very sure what happened when we connect the jumper wire. The wire is less than 20cm. I do not think it is...
View ArticleRE: Rotate the Widget/Window
Window rotation is a GUIX feature that was not available in SSP 1.0.0. The feature was added starting with SSP 1.1.0 and GUIX5.30. The widgets cannot be rotated by themselves.-Gerald
View ArticleRotate the Widget/Window
Hi,I am using S7G2-SK board and SSP 1.0.0.Is it possible to rotate the widget or Window to 90 degrees on lcd?Regards,Nandan
View ArticleRE: SD card using S7 DK/SK
There is a bug in SSP v1.1.0 when trying to use SD/MMC channel 1 (it works fine with SD/MMC channel 0) that causes the fx_media_open() function to return FX_IO_ERROR. I don't know if you are using...
View ArticleRE: SD card using S7 DK/SK
I Use the SDcard on channel 1 with ssp 1.1.1. with FileX on my own hardware. I had exactly the same problem as Wanjing. I could trace the problem into the driver , reading the card detect line. (High...
View ArticleSD card using S7 DK/SK
Hello, I am trying to get the SD Card Read/Write for my project. We are using FileX. In SSP1.0.0, we are able to assess the SD card. But when we try to connect to an external SD card Slot (via Jumper...
View ArticleRE: Crypto APIs crash when called
Fatih,Can you please elaborate as to what functionality is available via. the SCE Crypto Engine? I see the VSAs listing the SCE as part of their solutions, therefore I assume much of the framework is...
View ArticleRE: Crypto APIs crash when called
Fatih,Can you please elaborate as to what functionality is available via. the SCE Crypto Engine? I see the VSAs listing the SCE as part of their solutions, therefore I assume much of the framework is...
View ArticleRE: Crypto APIs crash when called
Rich,A summary of supported Crypto feature can be found in the Section 11 of the SSP Datasheet (R01DS0272EU0111). Here is the link: synergygallery.renesas.com/.../r01ds0272eu0111_synergy_ssp.pdfA more...
View ArticleCrypto APIs crash when called
If you are using crypto APIs and you hit the Default Handler, please continue to read. Some of the crypto APIs e.g. createKey(), encryptFinal(), addAdditionalAuthenticationData() crash when called....
View ArticleRE: NX SNTP nx_sntp_client_receiving_updates
Hi Tim,So Im not sure whats going on and where Im going wrong. Worst part is that I got to the point of using your code directly and still struggling. Im not seeing the callback getting executed....
View ArticleNX SNTP nx_sntp_client_receiving_updates
Dear Forum,Has anyone had any luck getting the example from the documentation to work for NTP? In using it in unicast mode. In nx_sntp_client_receiving_updates Im getting back NX_SUCCESS for status...
View ArticleRE: Adding nx_http_server component causes compiler errors in Synergy code
Find where FX_MEDIA is defined and make sure that there is an include path to it from the files listed in the error messages that want to reference it.It looks like FileX wants to have a storage media...
View ArticleRE: NX SNTP nx_sntp_client_receiving_updates
Sounds a little strange. I believe the pool.ntp.org IPs tend to "circulate" over time but I would be surprised that you couldn't ping and use that IP as a fixed value at least for a short while. I...
View ArticleRE: NX SNTP nx_sntp_client_receiving_updates
Good Morning Tim,Yeah I also thought that was weird. After I run it with dns running I then pinged it and checked the two ip numbers and they were different. So I was scratching my head as well, but...
View ArticleRE: Adding nx_http_server component causes compiler errors in Synergy code
You can use NetX Webserver without FileX, by including the following file in your thread entry source: (Please visit the site to view this file) (extension needs to be changed to .h).Regards
View ArticleRE: Adding nx_http_server component causes compiler errors in Synergy code
Gerald, how do I add an include path to the synergy generated source where my compile errors are?Karol, thanks, I added this to my project and added the preprocessor definition of NX_HTTP_NO_FILEX and...
View ArticleAdding nx_http_server component causes compiler errors in Synergy code
I have a project with the following components:nxnx_dhcptxsf_el_nxr_cgcr_elcr_ioportI attempted to add in nx_http_server and it's required component nx_md5, but when I add them I get the following...
View ArticleRE: Ethernet relay thru ports 0 and 1 (TRNMR register) and SSP
Hi Steve,My recommendation would be to modify the ethernet driver to support this feature or discuss with Renesas/EL to do non recurrent engineering.You don't have to use the configurator to set up the...
View Article