Flashloader Add-on with SSP 1.5.3
Is there a port or planned port to the new SSP version? Or should I just stick with 1.3?
View ArticleBACNET Demo and SSP 1.4.0
Hi,I'm working on a BACNet project on the demo board provided by Renesas. In order to begin this project, I saw that it exists a BACNet Demo which works with SSP 1.1.0. But SSP 1.1.0 looks old now and...
View ArticlePorting Renesas BACnetdemo to ssp 1.5.2 with pk-S5D9
Dear Friends,I'm trying to port The Bacnetdemo project(given by renesas) to Pk-s5d9 with ssp 1.5.2 and having issue with the netx(not able to ping the device from pc while its connected through...
View ArticleCan I get a callback or poll to make sure that an HTTP response has been...
I'm currently facing the situation where I have an HTTP server running and want to perform an action on the device after the HTTP client has received the reply that initiates the action.This is about...
View ArticleInvoke Boot Mode from application
Is it possible to jump from application to boot mode by software without reset sequence and MD pin ?
View ArticleNeed Sample code for 16 bit ADC of TB S1JA
I was trying to develop an application to read ADC values from analog channel in continuous scan mode the value read from the ADC was not proper i have checked the configuration and driver setup...
View ArticleClik here to view.
Problem with audio playback framework - garbled audio
Hello, We incorporated Renesas’s Audio Playback Framework (via DAC) into a product our company is developing some time back. This is used to play certain informational and alarm sounds during the...
View ArticleDK-S128 OOB project error when flashing it via SCI
Hello,I'm starting to develop using the S128 microcontroller with the different peripherals and modes. All things went right except for flashing the micro using the Renesas Flash Programmer V3.05 via a...
View Articlegx_canvas_polygon_draw() does not draw after updating from SSP 1.1.3 to 1.5.0
[S7G2 MCU]We upgraded from SSP 1.1.3 to 1.5.0. The custom draw function misses on drawing several widgets in the new SSP. Getting back to optimization level 0 did not help. Any suggestion on why this...
View ArticleNeed support to edit existing QSPI HAL driver
Hi,I am new to Synergy platform. I want to interface F-RAM QSPI device instead of Winbond Flash on the SK-S7G2 kit. I can solder the F-RAM device in place of winbond FLASH. Can you help me to point to...
View ArticleFunction to reset or reinitialize the filex or SDMMC
Hello, I want a function to reset or reinitialize the SD card drivers.
View ArticleDownload file from sd card to PC
HiI have a custom board based on S7G2. It has a SD card configured.I need to download a file from sd card to PC.I have seen the below forum...
View ArticleClik here to view.
USB CDC-ACM data channel not responding when connected to virtual machine
Hi,I am using the sample application from the "an-r11an0171eu0100-synergy-usbx-device-class-cdc-acm-mod-guide", to test a simple USB CDC-ACM communication. My setup is - host Windows 7 64 bit, S5D9-PK...
View ArticleChange to NX_PHYSICAL_HEADER value does NOT affect NX_PACKET allocation.
Using SSP 1.5.2 with E2 Studio 7.2, I set NX_PHYSICAL_HEADER=20 in my projects CDT User Setting Entries to allow for the creation of an 802.1q tag in the ethernet header. Unfortunately, the Tx packets...
View ArticleHow to interface a cellular modem using USB for high speed transfers
Hi all,For my project i need to transfer some large files (few thousands of KB) to my server using a cellular modem.I recently bought a CLOUD2 kit ( Quectel BG96 included) and i would like to use the...
View ArticleHow to use Internal Reference Voltage for ADC?
Hi all,how to enable Internal reference voltage in S5D9 controller, right now i am using external reference on VREFH0 for group A but ADC count is fluctuating so I want to use internal reference for...
View ArticleUSB device mode communications: driver for iOS controller?
We have developed code on a S5D9 that allows communication using USB-CDC from a program on a Windows PC host controller to the device. This works well as we use the Renesas USB driver on the Windows...
View Articleethernet web server
i wnat developed project data transfer using ethernet communication and recevied on internet i m confused about how to communicate. web api app using or http page based app.
View Articletimer
i am using 2 gpt timer in hal layer 1timer for 1ms and 2nd one is for 1microsecond and i also use timer callback routine also..now the thing is when i start the timer 2 for one micro second in timer 1...
View ArticleProblem Transitioning from R7FS7G2G3A01CFC to R7FS7G2H3A01CFC
Hi All, I'm attempting to move from the S7G2 3MB flash MCU to the 4MB version. This seemed simple enough by changing the device in the BSP Configuration, regenerating the project content then...
View Article