Messaging Framework
Hi,I guess i am missing something fundamental regarding the message framework. I have my settings for "Work memory size in bytes" at 10000 and when i fill the message queue my application of course...
View ArticleFilex writing large files to qspi
Dear Forum, Is there any documentation or example code that illustrates the correct way to write large files onto the qspi running filex. Does the new wear leveling play into this on ssp1.5.0? Though...
View ArticleUSB Mass Storage not functioning
I think my program is not even entering the thread in which I am calling the USBX functions. The program is stuck inside ux_hcd_synergy_register_read() function. Even though the thread has Auto Start...
View ArticleSIGTRAP error when using AJAX for submit form
HiAm working on S7G2-DK Board and working on web server loading from SD card.When i try to submit the form from web page , it goes to other page which i don't want.So i tried using ajax(as it sends in...
View ArticleBattery backup
How can i get Battery Back up in Thermostat Reference Program in DK S7G2.
View ArticleClik here to view.
fx_media_open return SSP_ERR_CARD_INIT_FAILED
i want to implement SD card on PK-S5D9.PK-S5D9 has no sd slot, so i connected sd card adapter.top of the sd_thread, fx_media_open returns error "SSP_ERR_CARD_INIT_FAILED"do you know what is...
View ArticleC++ support Question
I have a LCD driver written for Arduino. It is in C++ language. I want to use the code for Renesas Synergy MCU (S5D9).1. I have created C++ project. It does not support standard C++ string type....
View ArticleHow to handle RAM Parity Error with E2 studio.
I am using S7G2 SSP for my development. When I using sprintf function that time e2studio throwing RAM Parity Error.
View ArticleUSB Mass Storage media_status (device is busy notification)
Hello! Where can I find possible values for media_status, returned by USBX mass storage callback functions? Or, more specifically, how do I notify USB host that mass storage is temporarely not ready?...
View ArticleHow to resize flash memory qspi
Hi. I have started a project for SK-S7G2 that incorporates a 64M Bit external flash memory. I need to replace it with a 128M Bit. When I access the registers, I have seen that QSPI base address is...
View ArticleI2C Interrupt handling
Hello! Could someone help me to understand, why another function in my ISR function is not called? void smb_error_event_isr (void){ /* Save context if RTOS is used */ SF_CONTEXT_SAVE...
View ArticleNo Information for S1JA and S5D3
Hello Synergy Members,There is no information on the renesas website regarding S1JA MCU series and S5D3. And also no information for the target boards for both series. Both are supported in SSP...
View ArticleClik here to view.
HOW to use #include to CS +for CC
HI! I need to use printf("123"); to CS + for CC how can i do?
View ArticleClik here to view.
Symbol could not be resolved (NXD_MQTT_CLIENT could not be resolved)
hello,i have a problem of symbol could not be resolved.My e2 studio version is 6.2.0 and SSP version is 1.4.0 .i import the MQTT example,it can passed compile, but if i clicked the file the error will...
View ArticleDebug virtual console e2 studio
Hallo!I was trying to display some variables on the Debug virtual console. Unfortunately i can't get it done. I wrote a very easy software that use printf() to write "hallo world" but i am not getting...
View ArticleStrange issue with receiving frame and sending response
Hello,Just got working my hardware, I got a new issue with CAN bus. I want to receive a frame from my CAN analyzer and send a response if byte [0] of the frame is 0xFF. I works, but only there is a...
View ArticleHow to EASILY use QSPI
Last week our engineers searched various places (RenesasRulz, Knowledgebase, Renesas Website) to find complete directions on how to put part of our project into QSPI FLASH. There is a good RenesasRulz...
View ArticleFileX on USB Mass Storage Issues
Hi -I am working with FileX on USB Mass Storage on a custom design and having a few problems. To start with, I can navigate folders, create, read and write files on the USBMSC without any issues, but...
View ArticleClik here to view.
Getting error: 'UX_SYNERGY_DCD_BUSWAIT_VAL' undeclared during compilation
Hi All,I am using e2 Studio version 6.2.1 and SSP version 1.5.0. I am trying to add thread for USBX host class storage. I have selected components ux and ux_host_class_storage. But during compilation I...
View Article