Encryption - From Synergy S5D9 to PC
Hi,I have encrypt / decrypt working ok for BOTH S5 and PC (C#) however they are NOT compatible with each other.Here is the encrypt function for both sides, they do not produce the same encrypted...
View Articleprintf with float is not working
Hi, I try to get the printf with float to work and display some ADC data after conversion: // Read ADC g_adc.p_api->read (g_adc.p_ctrl, TEMP_CHANNEL, &temperatureCounts);...
View ArticleThreadx mutex problem
filex reads a file fine for awhile, then this happens. Any tips for tracking this down? problem seems to be a threadx mutex problem.
View ArticleWhen an USB host is connected on my board without using an I/O pin?
Ciao everyone; I need to know when an USB host (ex. PC) is connetted on my board (ex. S5D5 mcu) without using an I/O pin. I need this because I want to activate the USB-thread only when the USB is...
View ArticleClik here to view.
USBX Host Mass Storage VBUSEN Setting
I have a custom board that is very similar to the PK-S5D9 that utilizes the USB Host mass storage.The VBUS is controlled with a different IC that is active high instead of active low (on the S5D9).Does...
View ArticleS7G2-SK Serial Boot Mode
My S7G2-SK development board is resisting all attempts to enter Serial Boot Mode. A RX62N board works every time. I have the board powered with a USB power cable on J19. R107 to R110 removed to...
View Articlenx_http_client_get_start function : additional data
Hi everybody ! I'm currently working on the nx http client stack and I was wondering what kind of additional data I can put in the function nx_http_client_get_start, and how to format them...
View ArticleConnection to USB printer
Hello. SK-S7G2SSP 1.3.3e2studio 6.1.0 I need to connect the SK-S7G2 board with a matrix printer (Lexmark Forms Printer 2500), through the USB port.Any suggestion or idea of where I can get an...
View ArticleI2c SLC signal on pin 512
Hello, I'm currently trying to see the SLC signal on pin 512 (SKG2 board) on the oscilloscope. The project that i'm using is the I2C_HAL_MG_AP provided by Renesas. However when the program is...
View ArticleFlash Programming Option-Setting Memory
Hello,I want to add ID Code Protection after flashing the code area using my serial boot mode program.The Area Information command reports a configuration area at 0x40120040 to 0x401200BF, write in...
View ArticleURGENT!!! ThreadX suddenly stops
Hello:Please, I need your help in a hurry!!!I have an HMI system prototipe that must be working now, but I don't know why some threads stops working, it seems as the THREADX system suddenly stops.I...
View ArticleClik here to view.
ADC_HAL problem
CiaoI have remake the project AD_HAL from SK S7G2 to TB-S5D5 and I have found a problem with the printf procedure; why?please see the picture of my debugsomeone has an idea what is the problem?thanks...
View ArticleWorking E2 project for PE-HMI with usb cdc used for printf console output
There are a lot of projects but most either are for very old releases of the SSP USB stack or for other board. I've spent a day on this and I get timeouts on the PC side or SSP_TIMEOUT errs on the HMI...
View Articlenx_http_client_get_start crashing without an error code
Hi all, I am trying to get data from server using nx_http_client_get_start HTTP api after a PUT call using nx_http_client_put_packet. Unfortunately occasionally (60% of times) nx_http_client_get_start...
View ArticleS7G2 Bootloader for field updates
Hi,I have a custom application running on S7G2, designed using SSP 1.1.3 and GUIX Studio 5.3.3.2.I would like to stick with the above version of SSP and GUIX.I have a requirement of updating...
View ArticleModal Dialog events
I have a modal window that pops up based on an event.There is another event that should automatically close the modal window.Here is the code snippet:file1.c (custom user events generated...
View ArticleThreadX Event Flags
Hello, where can I find the ThreadsX user manual.More specifically for the use of the functions tx_event_flags_get and tx_event_flags_set.
View Articlenx_icmp_ping only work in step by step
Hello,I work on S5D9 and i want to attribute a "not_used ip address" too my board. I use nx_icmp_ping function : when it return NX_SUCCESS the ip address is already take and i try with another one. My...
View ArticleDraw lines or shapes in display (PE-HMI kit)
I am using S7G2 PE-HMI kit . In this kit using GUIX studio ,able to display images,create windows ,widget,charts and so on. But if i want to draw some shapes such as lines,circle , i am not able to...
View Articlewatchdog reset S124 when debugging
Hi,When debugging an S124 with Jlink the wachdog (or software reset ) does not work.How can I enable this?Dig
View Article