GUIX project with SSP1.2
Hi,Have migrated a project for GUIX to SSP1.2, its based on the SK S7G2 example project. The project debugs, but on screen image is a plain white background. I'm unsure if the display is being...
View ArticleClik here to view.
Deadlock and thread priority
Working from a guess here as I don't have traceX installed BUT....I've got 2 threads working on 3 devices on the same I2C bus. One thread (Audio) is set at priority 1. The other thread is at a much...
View ArticleDebugging S7G2-SK Fun with Sensors Lab
I attended the Renesas Iot workshop in December. I was unable to attended the advanced workshop last month that could have help me understand how to troubleshoot this problem with the Fun with Sensors...
View ArticleUSB Memory Stick Bootloader
For the RX family Renesas made a bootloader capable of loading and flashing a firmware file from an USB memory stick. With the Synergy family I've seen that the SSP 1.2.0 beta includes a...
View ArticleConsole Framework .argumentFind in 1.2.0-beta
Using SSP 1.2.0-beta, I'm trying to use the argumentFInd API as it is described in the SSP Manual at 4.2.5.3 but it does not work as expected.Besides strange behaviour in the recognition of valid...
View ArticleGUIX popup window close and background window update
Hello,I have a problem using GUIX SSP 1.2.0bI have a first window opened, an event occur and trigger the opening of an other window, smaller, over the first window.In the first window there are some...
View ArticleClik here to view.
SSI output not happening
Using SSP 1.2 betaI'm attempting a I2S output. I've got a thread with this setup (drivers, not upper level audio player framework). Write only (no RX), playing I2S master using WSL, CLK and DATA...
View ArticleFlash update on Synergy MCU: using MMF to swap between two images
I've been trying to test a flash update algorithm that uses the Memory Mirror Function. My background is, I've used Hew with the Renesas H8 family for more than 10 years. My firmware group is new to...
View ArticleChanging the edge sensitivity of Input capture driver
Hello,I am trying to make a DALI receiver. DALI is a protocol based on Manchester coding. I would like to use Input capture unit on a timer, to measure the periods between rising and falling edges on...
View ArticleSPI Byte Wide Transfers
So using SSP 1.2 beta and the framework for talking to an SPI memory out on SPI0: This is a memory part so to command it, you write the command (one byte). Sometimes you want to write 2 or 3 bytes to...
View ArticleMakefile Project with Existing Code
I'm trying to use the above option from File->New->Project->C/C++ on e2 version 5.3.0.023.I enter a project name and directory, select none for the toochain, and press Finish and nothing is...
View ArticleClik here to view.
ThreadX Source in Configurator Claims Linker Error
I added ThreadX source to my HAL/Common "thread" so that I could enable tracing. After adding the source, the component appears red says "refer to release notes if multiple linker errors occur". The...
View Articleideas to eliminate graphics flickering
Hello,First, I fully understand I'm asking about a configuration that the good folks on this forum have generally discouraged.For various reasons, the project wishes to use 24-bit color on an 800x480...
View ArticleExample for Audio Playback Framework on SSP1.2.0
Hi all,I try to port a project with Audio Playback Framework from SSP1.1.3 to SSP1.2.0 but I can't hear anything on the audio output.Do we have any example for Audio Playback Framework on SSP1.2.0? I'm...
View ArticleRegarding Synergy S5 IAP programming
Hello,I am working on Synergy S5 flash programming for bootloader application.I am using IAR workbench. Regarding flash programming I couldn't find the enough information about flash programming...
View ArticleClik here to view.
SPI framework crash on cleanup
I've got a problem with the SSP 1.2 beta framework for SPI. I have it set up in a pretty normal sort of way as far as I can tell. I do a write or writeRead (haven't attempted a read because you have...
View ArticleClik here to view.
ThreadX project not generating correctly using blinky framework
In an attempt at find another problem I've got, I wanted to generate a simple [mostly] blank threadx project (SSP 1.2 beta) using this S3A7 (144pin) part on my custom board.I generated a new project as...
View ArticleClik here to view.
usb device stack init fails
With S7G2 and SSp1.2.0b1, I just created a UsbDevice thread. Since I plan to use my own Vendor commands for all USB communications, I did not add any USB device class. When I run the automatic...
View ArticleRTC Driver
Hello,In my application I need to keep the time and date. I read the discussion: http://renesasrulz.com/synergy/f/synergy---forum/6760/real-time-clock-demo-application-code, I imported the developer...
View ArticleWhere do I find program details Ram used, rom used ???
I have looked at the map file and there is not a summary.Does anyone know where to find the summary of rom used, ram used after linking?Thanks,Steve D
View Article