IRQ14 driver callback not called using IRQ14-DS pin as interrupt source?

Hello Synergy Team,

we try to use e.g. IRQ14-DS (P010) pin to call our ISR for external IRQs. Using "native" IRQs everything is working, but if we assign e.g. for IRQ14 to pin P010, which is IRQ14-DS, then we can add and open the g_external_irq driver (here IRQ14) successfully, but our ISR is not called.

We've expected that we have done a rerouting of the IRQ14-DS with the configurator in that way, that the IRQ14-DS behaves now like the IRQ14 and it can be used as interrupt source for IRQ14 hal driver callback.

Is there something missing or did we overlook additional settings?

Your advice is greatly appreciated!

Thanks and regards
Ralph