Hi,
When using the widget,radial_progress_bar, on GUIX, it works great.
On guix its circular, but on a Board, with uC S5 or S7, its oval. (I tested on 3 types of lcd too)
I used the board PE-HMI1 for the photos attached and in a custom board I had the same result.
It have more width, around 5%~10%.
Please help, if anyone had similar problem or someone confirm if its a BUG.
Software: SSP 1.2.0 and GUIX 5.3.2.2
Link for Image: