I have a 7" TFT LCD and trying to connect with the DK-S7G2.
The LCD has 2 modes DE and SYNC
It has 18 bit RGB, and I connect Blue, Green and Red data bit 0-5 on the display to LCD data 0-17 connector J102 respectively. All other pins such as clock, LCD ON... also connected as well. The display is connect to scan from top to bottom and from left to right.
I have try with multiple configurations but the display always give me a black screen when I run the debug.
below is the configuration of the display that I don't see it match with any GUIx example configuration.
Please share your advice.
Thanks.